Hi, everyone.
I'm currently reviewing the stress analysis report for FPSO module.
In the Acceleration data document(Project Feed), the acceleration data for each axis are belows.(Z is vertical)
X:0.169(g), Y:0.334(g), Z:1.350(g)
But in Caesar-ii actual input data & Stress report, Actual input data is below.(Z is vertical)
X:0.169(g), Y:0.334(g), Z:-0.350(g)
There is difference on Z-axis. I roughly that this difference was made by gravity working Z-axis. Is there anyone who knows the exact reason?