A search of this forum for "cross" yields the following posts:
http://www.coade.com/cgi-local/ultimatebb.cgi?ubb=get_topic;f=1;t=001188#000000
http://www.coade.com/cgi-local/ultimatebb.cgi?ubb=get_topic;f=1;t=001392#000000
So, as you can see, the piping codes do not address crosses. You have two options:
a) ask the vendor of the cross what the SIFs are,
b) or perform your own Finite Element analysis to determine the SIFs of your fitting.
_________________________
Regards,
Richard Ay - Consultant