I'm experiencing C2ISOGEN.EXE - Application Error.

Is my system has:
- insufficient memory?

But my system is good. And I also tried to close all my applications and generate isometrics again.

My input:
- properties of material has been changed in the database
- has included piping files

I always work on elimination if no help/obvious reason.
- to check if model is the problem create pipe and one bend model. Try to create ISO
- try default style
- Start I-Configure outside CAESAR II and try Tools - Review Drawing menu option
- Carry on similar steps until faulty item is identified

COADE may have an answer for you.

Hi Chichiri,

Did you see "Application Error" when you try to generate isometric drawing or when you start C2isogen by clicking the green button on CAESAR?

Please call 281 890 4566.


Regards,

Shawn Zhong
COADE, Inc.

Shawn,

Okay, I have included files.
When I am clicking the green button it says "Properties for material have changed in the database. Keep the original properties?"

And when I click YES, this Error appears.

"C2ISOGEN.EXE - Application Error: The instruction at "0x5f403eba" referenced memory at "0xffffff4". The memory could not be read. Click OK to terminate. Click CANCEL to debug."

Thanks

I had problem with generating isometrics(ver5.0). Below is the explanation from Loren Brown for the problem I had. Hope it may be of help to you!

"It is most likely the size of the model. Isogen can't use something larger than about 300 elements. It also has a path/filename limitation of 80 characters. I would probably break the model into two or more smaller models for the purpose of exporting to Isogen."

cheers,
Sid.

Okay, Problem solved. Thanks to all for your help.