defining tee's (warning 24E) - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » defining tee's (warning 24E)

Topic Options

#9448 - 01/19/07 03:37 PM defining tee's (warning 24E)
egalla Member Registered: 01/19/07 Posts: 1 Loc: Colorado	I'm receiving a warning (24E) that tells me that three pipes frame into a two pipe joint. I've defined the tee, so why does it only recognize this as a two pipe joint?
Top

#9449 - 01/19/07 03:39 PM Re: defining tee's (warning 24E) [Re: egalla]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	Check the type of "Tee" you specified. If you selected something like "butt weld", that is a two pipe joint. If you can't find the problem, send us the ".CAESAR II" file. Edited by Richard Ay (01/19/07 03:44 PM) _________________________ Regards, Richard Ay - Consultant
Top

Moderator: Denny_Thomas, uribejl

0 registered (), 60 Guests and 1 Spider online.

Key: Admin, Global Mod, Mod

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM