OUT PUT REPORTS - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » OUT PUT REPORTS

Topic Options

#6498 - 09/03/06 11:42 PM OUT PUT REPORTS
sreedhar Member Registered: 07/27/06 Posts: 8 Loc: chennai , india	hi I am using CAESAR II 5.00its running the static analysis Perfectly.When I am going for view the out put reports in that iam not getting the MAX value among all loade cases in codecomplience and stress reports. What the reason for this and hoe to get that MAX value in the report Please help me. Thanks and Regards Sreedhar _________________________ sreedhar
Top

#6499 - 09/05/06 07:56 AM

Re: OUT PUT REPORTS

Richard Ay Offline

Member

Registered: 12/13/99
Posts: 6226
Loc: Houston, Texas, USA

Please make sure you are running the latest build (060707) of Version 5.00. This information is included at the beginning of the "Code Compliance" report, as shown here:

Code:

LOAD CASE DEFINITION KEY						
						
CASE 4 (SUS) W+P1+H						
CASE 5 (EXP) L5=L3-L4						
						
						
Piping Code: B31.3 -2004, April 29, 2005                     						
						
***  CODE COMPLIANCE EVALUATION PASSED  ***						
						
Highest Stresses: (lb./sq.in.) 						
CodeStress Ratio is 55.2 at Node 20 LOADCASE: 4 (SUS) W+P1+H						
Code Stress:          6902.4  Allowable:    12500.0						
Axial Stress:         4465.2  @Node     80  LOADCASE: 4 (SUS) W+P1+H						
Bending Stress:       4283.2  @Node     20  LOADCASE: 4 (SUS) W+P1+H						
Torsion Stress:        759.5  @Node     15  LOADCASE: 4 (SUS) W+P1+H						
Hoop Stress:          9150.0  @Node     80  LOADCASE: 4 (SUS) W+P1+H						
3D Max Intensity:     9830.4  @Node     80  LOADCASE: 4 (SUS) W+P1+H

_________________________
Regards,
Richard Ay - Consultant

Top

#6500 - 09/07/06 01:00 AM Re: OUT PUT REPORTS
sreedhar Member Registered: 07/27/06 Posts: 8 Loc: chennai , india	thank you but the exat problem is im not getting the max value foom load cases at each node in the code complience. please clarify me _________________________ sreedhar
Top

#6501 - 09/07/06 07:28 AM Re: OUT PUT REPORTS
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	I can't reproduce your problem. Please e-mail your ".CAESAR II" file to techsupport@coade.com so I can see what you're doing. _________________________ Regards, Richard Ay - Consultant
Top

Previous Topic

Index

Next Topic

Moderator: Denny_Thomas, uribejl