While Extracting the Stress Isos from ISOGEN module, Drawings are extracted with the STATUS MESSAGE:

"personal ISOGEN failed while running pass 2 POD module [PERSONAL ISOGEN error 32]"

Because of this error 32, "FAIL" message appears in one of the drawing.

How can I fix this problem? Please advice....

Thanks in advance.

Anun,

Are you using the latest version of CAESAR II? What does the message file say?

Those errors usually mean there's something in your model that ISOGEN thinks is unbuildable, such as a 10" pipe connected directly to a 6" without a reducer - what is a valid situation for stress analysis isn't always valid for buildability.

If you'd like, send your model to techsupport@coade.com and reference this thread.

Regards,

- David Little
- COADE, Inc.
- Houston, Texas

I am using Caesar II 5.00 (Build 05118).

and I have already sent the Model file to the technical support for the further n.a.

Thanks for your kind response.

Regards,

The first thing you should do is update your installation to the latest software build, which is "060707".

Second, if you're not receiving e-mail announcments regarding new builds, you need to follow the link on the Main Menu to "\help\on-line registration" and register your software. This is the only way we have of contacting users, and notifying them about software updates.