Dear Experts,
As per Energy Institute guideline, for AIV, module T2.7.1, "It is at the discontinuities with an LOF equal to one where corrective actions are required ".
However, Table 3.1 says to follow T-09 in-case of LOF is in-between 0.5 to 1. But as per my understanding, this table is generic one and specific corrective action (for LOF 0.5 to 1)is required if vibrations are due to transient mechanisms i.e. flow, pulsation etc.. (Refer Note-1 of table 3.1).
My query is, "SHOULD WE PERFORM ANY CORRECTIVE ACTION in AIV analysis, if LOF is in-between 0.5 to 1."?
Edited by ANKIT_PATEL (05/02/18 02:53 AM)