Hello Mr.Richard
please take a look at the caesar file alongwith othert supporting docs for the pressure balanced EJ. Kindly advise any corrections and modifications for proper functioning of the same.

Thnaks in advance.

Flexit

Hello Mr Richard Ay or Dave Diehl
I wanted to get this caesar file for pressure balanced EJ checked by caesar techincal guy because there is limited info on how to model pressure balanced EJ in your techncal guide. Please help or suggest someone who can help me !

See my original post for all attachments.

Thanks
Flexit

Dear Flexit - My name is Dan Edgar and I work for Pathway and was co-author of the expansion joint modeler system in CAESAR II. Seeing how you are new to the CAESAR II blog, I'll let you know that the blog is for questions and answers on specific quesitons. To ask a member to review your work is beyound the scope of the blog. However, your latest post indicates that you would like additional information on modeling a PB joint. To this end, I have an ASME paper on modeling joints that can be used as a guideline, but the file size exceeds the 2M size limit. As a reslut, I can't attach it. If you'll modify your profile to inclue your e-mail address, I'll send it to you via e-mail. Once you have reviewed this paper, if you have a specific question, please post it here and I'll be glad to respond.

Thanks for mentioning the rules of this forum. I actually wanted to send this file to ecustomer and get it officially checked because i haven't modelled a pressure balanced EJ in caesar before. However please send the paper you have mentioned on my email, "iamshailesh@gmail.com"

Thanks
Flexit

Intergraph CAS does not check/verify or otherwise "OK" anyone's work. We can review a model looking for something you say is incorrect, or mis-behaving. However, we do not approve anyone's work. Someone else in your organization needs to review and accept your work.

The paper has been sent to iamshailesh@gmail.com

Dear Dan Edgar
I have to modelise an elbow pressure balance expansion joint, Have any paper or doc can help me,
Thank you

Dear Dan Edgar,

May I kindly ask you to send me this ASME guideline paper as well ?

My adress: pnmail@web.de

Thanks in advance

Peter N.

Peter,

The paper has been sent.

Dear Mr. Dan Edgar,

I know this is a trouble for you,
But May I ask kindly to send me those ASME guideline paper for EJ?
It will be a great help for modeling proper EJ.

My E-address is albert01diega@gmail.com
Hoping for your response.

Thanks in advance.

M.A Diega

Dear Dan Edgar,

same for me, I'd like to read this interesting paper,

could you send it to me too?

ferigo@email.it

Thanks in advance!

I think Mr. Edgar is retired already. Not sure if he's still visiting this forum.