Pipeline stress Analysis Conservative method - Intergraph CADWorx & Analysis

You are not logged in. [Log In] Home Page » Forums » Analysis Solutions » CAESAR II » Pipeline stress Analysis Conservative method

Topic Options

#68177 - 01/31/17 08:09 AM Pipeline stress Analysis Conservative method
errajesh Member Registered: 05/18/14 Posts: 18 Loc: TAMIL NADU,INDIA	Hi All, I am doing the pipeline stress Analysis as per B31.4 CODE by using Caesar II Basic model in which the stress failure in OPERATING CASE is 114 % but if I do the same system using ALI the stress Ratio is 76 %..... This shows that Caesar II Basic model is conservative. Can you suggest whether my point of view is correct? and which method is good to adopt (ALI OR Caesar 11 Basic model) Best Regards K.RAJESH
Top

#68312 - 02/13/17 11:52 PM Re: Pipeline stress Analysis Conservative method [Re: errajesh]
errajesh Member Registered: 05/18/14 Posts: 18 Loc: TAMIL NADU,INDIA	Hi Mr. Richard, Can you give some details regarding my above query?
Top

#68318 - 02/14/17 07:56 AM Re: Pipeline stress Analysis Conservative method [Re: errajesh]
Richard Ay Member Registered: 12/13/99 Posts: 6226 Loc: Houston, Texas, USA	The ALA procedure is a published standard. The CAESAR II Basic method is based on the two papers published by LC Peng. (Personally, I would use the ALA method.) _________________________ Regards, Richard Ay - Consultant
Top

#68329 - 02/14/17 10:35 PM Re: Pipeline stress Analysis Conservative method [Re: errajesh]
errajesh Member Registered: 05/18/14 Posts: 18 Loc: TAMIL NADU,INDIA	Hi, Yes, I agree. Thank you... Best Regards K.RAJESH
Top

View All Topics

Moderator: Denny_Thomas, uribejl

0 registered (), 42 Guests and 0 Spiders online.

Key: Admin, Global Mod, Mod

April
Su	M	Tu	W	Th	F	Sa
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Forum Stats

12065 Members
14 Forums
16973 Topics
75151 Posts

Max Online: 303 @ 01/28/20 11:58 PM

Top Posters (30 Days)