Active Topics | Active Posts | Unanswered Posts Past 24 hours | Past 48 hours | Past 7 days
Forum   Subject
CAESAR II
Jump to new posts Re: Splitting pure thermal force and friction force by Van Ha @ Yesterday at 10:40 PM

I think I know what I want now. As per your comment: "it's not necessarily accurate to conclude that the F2(frictionless)-F2(friction) is necessarily due to friction at node 2, but rather friction interplay between nodes 1 and 2" What I want to se
CAESAR II
Jump to new posts Re: Splitting pure thermal force and friction force by Van Ha @ Yesterday at 09:13 AM

How about if the guide has no gap in the model? Can I say 1500 is due to friction? Or still, be friction interplay between supports?
CAESAR II
Jump to new posts Re: Splitting pure thermal force and friction force by Michael_Fletcher @ Yesterday at 08:45 AM

My nomenclature was confusing. Let's simplify further. You have a system that consists of nodes 1010 thru 1040. 1020 is a bend in the horizontal. nodes 1010, 1030, and 1040 are guides with vertical supports, and let's say guides with gaps, because
CADWorx Plant
Jump to new posts Re: Both Plant 3D and Cadworx installed on the same machine? by Matt.Worland @ Yesterday at 08:04 AM

I use these in my shortcuts as part of the Target path. For CADWorx and AutoCAD I use "C:\Program Files\Autodesk\AutoCAD 2022\acad.exe" /product ACAD /P CADWorx_Plant_2020_R2 For Plant3D I use "C:\Program Files\Autodesk\AutoCAD 2022\acad.exe" /prod
CADWorx Plant
Jump to new posts Re: Both Plant 3D and Cadworx installed on the same machine? by treysoucie @ Yesterday at 07:09 AM

that's essentially the order i did this lol
CAESAR II
Jump to new posts Re: Splitting pure thermal force and friction force by Van Ha @ Yesterday at 04:09 AM

What I can imagine from your reply is as follow: Considering Stopper/Guide force at a support. The case F2(frictionless) consists of the thermal force "T1" totally coming from the thermal expansion of the system. No the influence of friction The
CADWorx Plant
Do you have regular AutoCAD installed also ? I recall Plant 3D does not have a regular AutoCAD profile like Mechanical or electrical, so Plant is the only option it can latch on to. You could try the following. 1. Uninstall everything. 2. Install r
CADWorx Plant
Our company is running both Cadworx 2020 R2 sp1 on autocad 2022 and Plant 3D 2022. the problem is that we cant get either one to load by themselves. when we open plant 3D icon it tries to run cadworx on top of plant 3D. the same thing happens when we
CAESAR II
Jump to new posts Re: Splitting pure thermal force and friction force by Michael_Fletcher @ 06/27/22 10:22 AM

My opinion is that this will provide numbers, but they'll probably be non-sensical except perhaps for simple systems without non-linearities or sign changes with/without friction. If axial friction at node 1 prevents lateral load at node 2, whereas
Who's Online
0 registered (), 27 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
June
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
Forum Stats
12004 Members
14 Forums
16838 Topics
74650 Posts

Max Online: 303 @ 01/28/20 11:58 PM
Top Posters (30 Days)
Richard Ay 10
danb 7
Van Ha 7
Vanman 7
Michael_Fletcher 6