I would suggest the following:

1. Create a custom restraint report.
2. Put in Fx, Fy, Fz, Mx, My, Mz.
3. Do NOT put in Dx, Dy, Dz, Rx, Ry, Rz. (See note below.)
4. Enable the option to print the node number on every line.
5. Make it a summary.
6. Export your custom report to Excel. If CAESAR and Excel are incompatible, use another format at import into Excel as needed, utilizing data to columns as necessary.
7. Enable data filter and click on the sorting buttons.

Back in the day, I would use this trick to quickly locate lift-off points for hot sustained cases.

Note: Inputting displacements causes the "node number on every line" to not work in some (or all) versions of CAESAR.