Dear all,

I have modeled a hemispherical dish in PVELite 2011 and put a nozzle on top of it.

I have applied also the nozzle loads on it and performed the WRC 107 calculation.

after observing the results, i have found a deviation.
pvelite uses the grpah SR-2 for calculating the values Nx and many.

after ref to the hard copy of wrc 107 there is a difference between the 2 values of nx,ny,mx and my.
please Help.

Please Help.

Moderators please help.

I have checked the model once again.
still no change in the values of nx,ny.mx amd my.

Also these vallus do not depend upon the load direction of p,Vl,Vc,Ml,Mc amd Mt.

Moderators please help.

I think you best send your model in to techsupport, so the Intergraph people can have a look at your model.