Dear sir
we are using PVELITE 2012. while Design Vertical Heat Exchanger. we have observed following descripanty.

Design Condition
1. Shell side is with full liquid head
2. Channel side Gas, No static head
3. Exchanger type : Fixed tube sheet(integral).

Discrepancy :
While Design Body flange of Channel side, PV Elite is considering Static Head of Shell side. which is not correct design consideration.

Team PVELITE is requested to fix this error.

Also, i was not able to upload the 2012 PVElite file as uploading only support the .pvi extension. request to check & fix.


Regards
Vishal Tailor